Coaster 4838B1, Руководство по сборке

Страница: 3 / 6

ASSEMBLY INSTRUCTIONS
PAGE 3 OF 6
HARDWARE IDENTIFICATION
www.coastercompany.com
Z-B1(BOX1) - HARDWARE PACK IS LOCATED IN 4838 (B1)
HARDWARE NAME
FIGURE
QTY
4PCS
12PCS
4PCS
16PCS
WOOD DOWEL
COTTER PIN
20PCS
2PCS
4PCS
BARREL NUT
16PCS
IRON BOWL
(42mm x 35mm x 32mm - RBW)
ALLEN WRENCH
(4mm - RBW)
4PCS
1PC
COTTER CLIP
(28mm x 8mm x 1.5mm - RBW)
2PCS
BOLT 2
BOLT 1
ITEM
:
4838 (B1 & B2)
NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY
PROCESS; HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
2
3
1
4
6
7
5
8
10
11
9
ASSEMBLY TIPS:
1.Remove hardware from box and sort by size.
3.Please follow attached instructions in the same sequence as numbered to assure fast and easy
assembly.
Warning!
1.
store immediately.
2. This product is for home use only and not intended for commercial establishments.
2.Please chesk to see that all hardware and parts are present prior to start of assembly.
Don't attempt to repair or modify parts that are broken or defective. Please contact the
BOLT 3
BOLT 4
FLAT WASHER