ITEM:
300261T (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
B1 ( BOX 1)
A
HEADBOARD PANEL
1PC
C
RIGHT HEADBOARD
LEG
1PC
B
LEFT HEADBOARD
LEG
1PC
B2 ( BOX 2)
D
BED SLAT
4PCS
H
RIGHT FOOTBOARD
LEG
1PC
E
BED SLAT SUPPORT
WITH LEVELER
4PCS
I
FOOTBOARD PANEL
1PC
F
BED RAIL
2PCS
G
LEFT FOOTBOARD
LEG
1PC
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 300261T (B1)
1
BOLT
(
JCBC M6 x 50mm - RBW)
6PCS
3
ALLEN WRENCH
(M4 x 60mm - BLK)
1PC
2
LOCK WASHER
(20mm - RBW)
6PCS
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 300261T (B2)
4
FLAT HEAD SCREW
(CSK M4 x 32mm - RBW)
8PCS
6
SMALL ALLEN
WRENCH
(M4 x 100mm - BLK)
1PC
5
BOLT
(
JCBC M6 x 40mm - RBW)
6PCS
7
BIG ALLEN WRENCH
(M5 x 70mm - BLK)
1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
PAGE 2 OF 5
ASSEMBLY TIME
20 MINUTES
HB
1PC
300261T (B1)
FROM BOX 1
HEADBOARD
COMPLETE
