ITEM:
223143
PAGE 4 OF 4
COASTERFURNITURE.COM
1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the short screw.
2. Determine where the furniture is to be placed and mark location on the wall for the mounting bracket
screw hole approximately 2" below the bracket mounted to the edge of the furniture.
3. Drill a 3/16" hole in the wall. Press the plastic wall plug into the hole and gently tap until the flange on
the wall plug is against the wall surface.
4. Position the bracket over the wall plug and use the long screw to securely attach the bracket to the wall.
5. Place the furniture so the bracket on the back edge is in line with the bracket on the wall.
6. Lace an end of the cable tie down through each bracket. Bring both ends together and slide the
beaded end of the cable tie through the keyhole shaped slot on the other end until snug. Pull down on
the beaded end until it snap locks into the keyhole slot.
7. To double lock return the beaded end back through the keyhole as shown.
8. Check to make sure the cable tie is securely laced and locked to the brackets.
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to
detach this
restraint
before moving the furniture may
result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNING
Injury
may
result from tipping
furniture.
This
restraint
may protect against tipping
furniture.
Do not
allow
children to
climb on furniture.
This
restraint
is not a
substitute for proper adult supervision.
