ITEM:
222751Q (B1-B4)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
1
BOLT
( 5/16" x 45mm - RBW)
10PCS
2
LOCK WASHER
( 5/16" - RBW)
10PCS
3
FLAT WASHER
( 5/16" - RBW)
10PCS
4
ALLEN WRENCH
(4MM - RBW)
1PC
5
THREADED BOLT
( 5/16" x 3-1/2" - RBW)
8PCS
6
HALF ROUND
NUT
( 5/16" - RBW)
8PCS
7
HEX NUT
( 5/16" x 14mm - RBW)
8PCS
8
WRENCH
(14MM - RBW)
1PC
9
FLAT HEAD SCREW
( 4 x 30mm - RBW)
6PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 5
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 222751Q (B2)
Z-B4 (BOX 4) - HARDWARE PACK IS LOCATED IN 222751Q (B4)
∅
∅
∅
∅
∅
∅
∅
