Coaster 205470Q, Руководство по сборке

Страница: 5 / 29

Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 205470Q (B1)
1
1PC
ALLEN WRENCH
(M4 x 110MM- BLK)
2
16PCS
SHORT BOLT
(M6 x 50mm - BLK)
3
8PCS
LONG BOLT
(M6 x 60mm - BLK)
4
22PCS
LOCK WASHER
(5/16" - BLK)
5
22PCS
FLAT WASHER
(5/16" x 18 x 1.2 - BLK)
6
8PCS
WOOD DOWEL
(M8 x 30mm)
8
20PCS
LONG FLAT HEAD SCREW
(#8 x 1 1/8" - BLK)
HARDWARE IDENTIFICATION
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
7
8PCS
SHORT FLAT HEAD SCREW
(M4 x 20mm - BLK)
9
2PCS HEX NUT
(M6 - RBW)
10
2PCS U BRACKET
(26 x 63 x 70mm - RBW)
11
1PC WRENCH
(2 x 24.5 x 85 - RBW)
24PCS
PAN HEAD SCREW
(M4 x 12mm - BLK)
12
ITEM:
205470Q (B1-B3)
ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 5 OF 29