PAGE 5 OF 5
R
FINE FURNITURE
ANTI - TIPPING KIT
PARTS IDENTIFICATION
www.coastercompany.com
A.
1 SET
HARDWARE IDENTIFICATION
1.
SHORT SCREW 1 PC
2.
LONG SCREW
1 PC
3.
CABLE TIE
1 PC
4.
L BRACKET
2 PCS
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail
of the console server using short screw provided,
A
4
1
STEP 2
Locate the other bracket on the wall over a wall stud
and two inches below the mounting bracket secured to
the back of console server. Attached to the wall stud using
the long screw provided, through the smaller hole.
through the smaller hole.
2
4
STEP 3
Place the console server into position so both mounting brackets are vertically in line. Lace the end of the restraint strap
through the larger hole in each mounting bracket. Bring both ends together and slide the flat end through the
locking end and draw it through until all slack is removed. Confirm that the strap is securely laced and locked.
4
4
3
WALL
WALL
CONSOLE SERVER
