3
Legend Door (NVR) 01-29-2015
Determine and mark the curb centerline
as shown in figure 1.
Measure opening width and trim Sill to 1/16" less than measurement
optained. Caulk underside of Sill (B) and position it on the center line .
Insure that Sill lip faces toward outside of enclosure.
Position Wall Jamb (A) up against the shower wall and on top of
Threshold (B) as shown in figure 1. Adjustment holes should be facing
toward interior as shown.
Level and plumb Wall Jamb.
Using the Wall Jamb's installation holes as guides, drill three (3) 1" deep
installation holes on the wall.
Use a 3/16" masonry bit when drilling through ceramic tile, marble or any
masonry type surface. Insert Plastic Screw Anchors (F). Otherwise use
a regular 1/8 drill bit and discard Plastic Anchors.
Secure Wall Jamb with three (3) #8 x 1-1/2" pan head screws (E).
figure 1
STEP 1
Position Door Assembly Side Wall Jamb
figure 2
STEP 2
Position
Insert Wall Jamb (D) onto Door Panel's Expander Jamb (c2) as shown. Bury the Wall Jamb (D) onto the Door Panel as far as it
will go.
