Option Switches
1.
Place Option Switch 1 Down For installations in the
2014-15 Jeep Cherokee
2.
Place 2 in the UP position for all applications.
3.
Place 3 in the UP position for all applications.
4.
Place 4 in the UP position for all applications.
5.
Place 5 Down to disable override features for factory A/V input and navigation
input in motion.
APPLICATIONGUIDE
ADDITIONAL VEHICLES MAY APPLY OR BE ADDED LATER
If your vehicle includes the 8.4” or 4.3 screen and is not on the application list below,
the UCONNECT LOCKPICK AIR V1 should be purchased.
UCONNECTAIR V2APPLICATIONS
2013-15
DODGERAM
2014-15
JEEPGRANDCHEROKEE
2014-15
CHEROKEE
2014-15
DURANGO
2015
CHRYSLER200
5.
If you do not currently have a rear view camera and want to add one to your vehicle, the
Lockpick makes it easy.
Included on your Lockpick wiring harness, is an RCA connection on the
Lockpick harness for video input of an aftermarket rear camera. Also, power for your rear view
camera is provided and labeled on the Lockpick harness as REVERSE CAM 12V + power output
A GROUND connection is also provided to make connecting and powering your camera simple.
Note: Some installers may be familiar with using the reverse taillight as a power source for
aftermarket rear view camera installations. This is not recommended or needed when using
the Lockpick as it supplies all power needs and video connections. Failure to connect the
camera power to the Lockpick will prevent the Lockpick from being able to power and display
the aftermarket camera at times other than reverse.
6.
If you already have a factory rear view camera, no extra wiring or connections are necessary
for the Lockpick to be able to activate and display the camera at any time, just plug and play.
7.
If you would like to install a 2nd rear camera
, the Lockpick provides an additional connection
for alternate automatic rear camera viewing. Often, when pulling a trailer or other load, the
factory rear camera is obstructed and provides little useful information when backing up. The
