Sail Track—Step 7:
Attach the side wall to your RV by threading the white
strip into your sail track, the easiest way to do this is by
detaching this from the side wall and then firmly press-
ing the Velcro back together once threaded
For the finishing touches on the side wall, simply roll up
the excess material and clip it onto the telescopic rafter
pole by using the elasticised clips
Sail Track—Step 8:
You can also cut strips into the PVC near the roller tube
to achieve a flush fit
You need to attach the awning vinyl to the side wall,
this is done by clipping the suspender buckles to the
canopy. We’ve included a vinyl strip to protect your
awning vinyl
You can also tidy the extra strapping on the suspender
buckles, by using the black bands supplied
Pole—Step 1:
Follow the steps as previously outlined (on how to
attach the front and the side wall panels)
With the side wall in position, locate a telescopic pole
(one end has a rubber foot and the other has a U-
shaped clip), this needs to be inserted into the pole cav-
ity on the side wall panel
Open the receiving pocket and slot the telescopic pole
inside, keeping in mind that the U-shaped end should be
firmly clipped onto the telescopic rafter pole (that the
side wall is hanging off of)
Close the pole cavity
Telescopic Pole
