Coast Spas Swim 2100VE, Руководство пользователя

Страница: 24 / 32

24
Description of the Buttons
Introduction
Main Screen - The main screen displays current time, water temperature, and status of the system accessories.
Priming Mode - When power is ON, the system will enter priming mode with ‘Priming Mode’ displayed on the
panel. In this mode, all devices such as JETS, BLOWERS or LIGHT are operable. JETS can be turned on and off to
prime the pump. The system will exit Priming Mode and go to the MAIN display when the RETURN button is
pushed, or after 4 minutes of inactivity.
SPA OPERATION - Turn system accessories ON and OFF by pushing the button on the right side of panel
(LIGHT, JET, THERAPY …) These accessories have timeout defaults from the manufacturer and will turn OFF au-
tomatically after the time has expired. Default Timeout time for LIGHT is 60 minutes; THERAPY is 15 minutes; JET
at low speed is 60 minutes; and JET at high speed is 15 minutes. The user can change these default times in
“DEVICE TIMEOUT” setting menu.
Menu Navigation
• MENU: use to enter setting menu and sub-menu screens. For screens with several settable fields
(example: DATE-TIME screen), use MENU button to navigate between different fields within the screen.
• UP and DOWN: use to navigate between different options or changing values of a field.
• RETURN: use to confirm the setting and goes back to previous screen.
Setting Temperature - To change water Set Temperature, use UP and DOWN buttons to set the desired tem-
perature. The screen will display “SET TEMP” with the current set temperature. After 5 seconds without change to
the set temperature, the screen will go back to the MAIN screen with the current water temperature displayed.
Changing the Set Temperature will turn on a pump so that the controller will be able to get an accurate water tem-
perature and determine if the water needs to be heated.
Heater - When the heater pump turns on the HEATER START-UP icon will appear if heat is needed. The Heater
will turn on and the HEATER icon will appear after 5 minutes
Panel Timeout - If a user is in the Settings Menu and no button is pushed within 15 seconds, the screen will
timeout. The current screen setting will be lost and the panel will revert back to the MAIN screen. In MAIN screen, if
no button is pushed within 60 minutes, all LED and LCD lights will turn off and the panel will go to sleep. Any button
pushed will wake the panel, LED and LCD lights will turn back on and the panel will Poll for water temperature.
Enter Setting Screens
Press MENU button to display a list of Setting screens.
Use UP and DOWN to navigate between various Setting screens.
UP
DOWN
RETURN
MENU
LIGHT
JET 1
SWIM
WORKOUT
JET 2
Description of the Buttons
Introduction
Main Screen - The main screen displays current time, water temperature, and status of the system accessories.
Priming Mode - When power is ON, the system will enter priming mode with ‘Priming Mode’ displayed on the
panel. In this mode, all devices such as JETS, BLOWERS or LIGHT are operable. JETS can be turned on and off to
prime the pump. The system will exit Priming Mode and go to the MAIN display when the RETURN button is
pushed, or after 4 minutes of inactivity.
SPA OPERATION - Turn system accessories ON and OFF by pushing the button on the right side of panel
(LIGHT, JET, THERAPY …) These accessories have timeout defaults from the manufacturer and will turn OFF au-
tomatically after the time has expired. Default Timeout time for LIGHT is 60 minutes; THERAPY is 15 minutes; JET
at low speed is 60 minutes; and JET at high speed is 15 minutes. The user can change these default times in
“DEVICE TIMEOUT” setting menu.
Menu Navigation
• MENU: use to enter setting menu and sub-menu screens. For screens with several settable fields
(example: DATE-TIME screen), use MENU button to navigate between different fields within the screen.
• UP and DOWN: use to navigate between different options or changing values of a field.
• RETURN: use to confirm the setting and goes back to previous screen.
Setting Temperature - To change water Set Temperature, use UP and DOWN buttons to set the desired tem-
perature. The screen will display “SET TEMP” with the current set temperature. After 5 seconds without change to
the set temperature, the screen will go back to the MAIN screen with the current water temperature displayed.
Changing the Set Temperature will turn on a pump so that the controller will be able to get an accurate water tem-
perature and determine if the water needs to be heated.
Heater - When the heater pump turns on the HEATER START-UP icon will appear if heat is needed. The Heater
will turn on and the HEATER icon will appear after 5 minutes
Panel Timeout - If a user is in the Settings Menu and no button is pushed within 15 seconds,
the screen will timeout. The current screen setting will be lost and the panel will revert back to
the MAIN screen. In MAIN screen, if no button is pushed within 60 minutes, all LED and LCD
lights will turn off and the panel will go to sleep. Any button pushed will wake the panel, LED
and LCD lights will turn back on and the panel will Poll for water temperature.
Enter Setting Screens
Press MENU button to display a list of Setting screens.
UP
DOWN
RETURN
MENU
LIGHT
JET 1
SWIM
WORKOUT
JET 2
OWNER’S MANUAL
2020