Coast Spas INFINITY EDGE SWIM, Руководство пользователя

Страница: 18 / 27

18
OWNER’S MANUAL
2020
own set temperature as programmed by the user. This way, when
a range is chosen, the spa will heat to the set temperature associ-
ated with that range.

High Range can be set between 80°F and 104°F.

Low Range can be set between 50°F and 99°F.
HEAT MODE – READY VS. REST
In order for the spa to heat, a pump needs to circulate water
through the heater. The pump that performs this function is known
as the “heater pump.” The heater pump can be either a 2-speed
pump (Pump 1) or a circulation pump. If the heater pump is a 2-
Speed Pump 1, Ready Mode will circulate water every 1/2 hour,
using Pump 1 Low, in order to maintain a constant water tempera-
ture, heat as needed, and refresh the temperature display. This is
known as “polling.” Rest Mode will only allow heating during pro-
grammed filter cycles. Since polling does not occur, the tempera-
ture display may not show a current temperature until the heater
pump has been running for a minute or two. When the heater
pump has come on automatically (for example for heating) you
can switch between low speed and high speed but you cannot
turn the heater pump off.
RESTRICTING OPERATION
The control can be restricted to prevent unwanted use or tempera-
ture adjustments. Locking the Panel prevents the controller from
being used, but all automatic functions are still active. Locking the
Settings allows Jets and other features to be used, but the Set
Temperature and other programmed settings cannot be adjusted.
Settings Lock allows access to a reduced selection of menu items.
These include Filter Cycles, Invert, Information and Fault Log.
They can be seen, but not changed or edited.
The Lock option can be accessed from the “
Settings ” menu.
UNLOCKING
The same steps are used to Lock and Unlock. To lock
either Settings or Panel first select Settings (if it says
“Unlocked”) or Panel (if it says “Unlocked”), than press
the word “Lock“ for at least 5 seconds. To unlock either
Settings or Panel first select Settings (if it says “Locked”)
or Panel (if it says “Locked”), than press the word “Lock“
for at least 5 seconds.