Coachman Travelmaster 2022, Руководство пользователя

Страница: 38 / 112

C22M-1
3-22
(B)
C
E
V
A
B
(B)
Use
Page
EN
Use – Water/waste water systems
FILLING WITH FRESH WATER
WATER/WASTE WATER SYSTEMS
Ensure that the following outlets are closed:
• the fresh water tank’s drain valve and
electric drain valves.
See the control panel (B).
• the water heater’s drain valve (C) next to the boiler.
2 Undo the filler cap.
Fill the tank with fresh water.
Reading the fresh water tank level (A).
Flush the water system and water heater:
• if water consumption has been low
(water not fresh).
• if the system has been empty for some time
(long-term storage).
See also the “Draining the fresh water system”
section .
3 Start the water pump.
• Ensure that the water pump is activated on the
control panel. The water pump icon must be visible.
If necessary, use the button (V) to activate the
water pump.
• Turn a water tap on.
4 If the water system was empty:
Fill the water heater by turning on a hot water tap until
there is an even flow from the tap’s spout.
Bleed the water system by getting the water pump to
pump water out in the kitchen, hand basin and shower.
Important!
Drain the grey water tank when you fill up with fresh
water. This avoids the risk of overfilling the grey water
tank.
1 Activate the alarm on the control panel (E).
The alarm goes off when the tank is full.
Switch off the alarm by pressing the icon (E) again.