7
10
EN
G
LI
SH
4. Tighten the screws and fasten the coupler in place by tightening the clamp using an Allen key.
5. Remove the protective rubber cap on the end of the lower shaft.
6. Press and hold in the release catch on the coupler (5). Insert the lower shaft into the coupler and release
the catch into the desired hole. There are three holes to allow the trimmer head to be set at three
different angles.
7. Lock the shafts together by tightening the locking knob on the coupler.
Содержание YT9231
Страница 2: ......