10
EN
G
LI
SH
Operating instructions
Note:
• The air conditioner should be placed on a firm, level surface capable of supporting
its weight.
•
Make sure to keep at least 30 cm of free space around the
air conditioner.
• The wheels are fitted to facilitate movement over flat surfaces. Never try to roll
the air conditioner over uneven or soft surfaces.
• If the air conditioner should be shut off inadvertently e.g. by a power cut, it will
restart automatically with the same settings it had before the power cut when
the power comes back on.
• The remote control has an 8-metre range. Point the remote directly at the air
conditioner making sure that there is no furniture or other objects obstructing
the signals from reaching the air conditioner.
• The signals from the remote can be blocked if the IR sensor on the air conditioner
is exposed to strong sunlight.
• Do not expose the remote control to strong sunlight, impacts, shocks or wetting.
Changing the units of temperature, °C or °F
Remote control
Hold in [
▲
TEMP
▼
] to switch between units.
Main unit
Hold in [ + ] and [ - ] simultaneously to switch between units.
The Cool, Dry and Fan Modes
• The Cool, Dry and Fan modes can be controlled both from the main unit and using
the remote control. The instructions below explain how the modes are controlled
from the main unit. In some of the modes, the fan speed can only be set using
the remote control (see below).
• If you wish to use the remote control: Press [ MODE ] on the remote control and set
the temperature with [
▲
TEMP
▼
].
Air Conditioner Mode (Cool)
1. Plug the mains lead into a wall socket.
2. Switch the air conditioner on.
3. Press [ MODE ] until the “Cool” indicator lights up.
4. Press [ + ]/[ - ] to set the desired temperature, 17–30 °C (62–86 °F). The display
shows the set temperature.
Note:
The fan speed cannot be set using the control panel on the main unit.
Set the desired fan speed using the remote control.
