2
½
" deck screws - 10
Part of the seat rail is not
shown to improve visibility.
Note the position of the seat rails. The rails
overhang the legs and rest on them.
OUTDOOR CHAIR ASSEMBLY
(continued)
3.1
Position the Back Upright (6), beveled end down, in the rear corner of
the seat frame.
3.2
Secure the Back Upright to the seat frame with two 3" Deck Screws
driven through the rear Seat Rail (4).
3.3
Drive a single 3" Deck Screw through the Seat Side (5) into the
Back Upright.
3.4
Install the second Back Upright in the same manner.
3.5
Secure the Back Rail (7) to the top of the Back Uprights with 3"
Deck Screws.
4.1
The seat assembly is installed with a 5° seat slope from front to back.
The slope is created by attaching the seat assembly to the legs at the
dimensions shown. The front seat rail rests on the front legs 133/4" up
from the base of the leg. The measurement is made along the outer
edge of the front leg.
4.2
The rear seat rail rests on the rear legs 121/4" up from the base of the leg.
The measurement is made along the outer edge of the rear leg.
4.3
Confirm that the span of the legs is 273/4".
4.4
Secure the seat assembly to the Legs and Arm Crossmember with 2½"
Deck Screws, located as shown.
STEP 3.
BACK-FRAME ASSEMBLY
STEP 4.
SEAT-TO-LEG ASSEMBLY
4
27
3
/
4
"
13
3
/
4
"
12¼"
3" deck screws - 10
