COMPOST BIN ASSEMBLY
(continued)
NOTES
8
11.1 Center the lid on the bin and secure the hinge leaves to the lid with
#10 x 3/4" Wood Screws.
11.2 Center the door in its opening and secure the hinge leaves to the bin
with #10 x 3/4" Wood Screws.
11.3 Secure the Hasp Staple with the screws provided.
11.4 Attach the Handle with the screws provided.
STEP 11.
ATTACH THE LID, DOOR, HANDLE AND STAPLES
Staple
#10 x 3/4" Wood Screws - 8
5
½
" Door Pull - 1
Hasp Staple - 2
NOTE:
• Only 2 screws are used on each
hinge leaf.
• Screws are NOT placed in the
holes located next to the hinge
barrel.
Disclaimer: In addition to the Terms of Use found at www.fcl.crs/contact-us/privacy-terms, you are responsible for any applicable code approval or permits associated with
the construction and use of this plan. Check with a building-code official or a building expert to make sure that the materials and construction methods shown meet local
codes and conditions and are suitable to your situation. It is the responsibility of the builder to ensure the proper tools, measurements, cuts and building techniques are used
in the construction of this plan. CO-OP
®
assumes no responsibility for the incorrect use of this information. Please ensure the manufacturer's instructions are followed in the
use of all tools and materials and heed all recommended safety guidelines.
®CO-OP and design trademark are registered trademarks of Federated Co-operatives Limited, Saskatoon S7K 3M9
