Technical Information
LED Status Light
LINK/ACT
Lights when the adapter is ready to
use and flashes when it is active.
LINK/ACT
Unable to connect to a wireless network?
1. Ensure that the LEDs of your router are correctly lit.
Check whether your Wireless LAN settings (e.g. SSID, Channel Number) are the same as the router’s.
Check whether you use the same encryption key (e.g. WEP or WPA) for both CQU-906 and the router.
2. Make sure that your CQU-906 is correctly installed.
Check that your CQU-906 is plugged in properly to the USB port or try to plug the CQU-906 into another USB
port if available.
The LED on CQU-906 should be lit. If not, (i) there could be a hardware problem, or (ii) CQU-906 is disabled or
(iii) device driver is not installed properly.
For additional information, please visit the product website:
http://www.cnet.com.tw
12-06G0397-B1
