How to Restore the Default Password and Configuration Settings
1. Use a sharp object such as a pen or a paper clip to press and hold the Reset button, located on the front panel of
the router, for about 10 seconds, until the STATUS light goes off.
2. Release the Reset button, and wait for the router to restart, and for the Power light to stop blinking and become
solid green.
The factory default settings will be restored and the router’s IP address will be reset to
192.168.1.1
, user name to
admin
, and password to
admin
.
Note APN & Phone Number are required.
User Name & Password can be optional.
The common APN name is
internet
and the phone number is
*99#
.
USB Modem Does Not Work With the Router
If your USB modem is not working with the router. Check the support list to ensure you are using a
supported device. CNet’s supported device list changes regularly. We update our supported
device list after a device is approved. If the device you have is not on the list, that means we do
not support it at this time. The supported device list can be found at: http://www.cnet.com.tw
If you are still unable to access the Internet after following above instructions. Please consult the
User Manual or contact CNet Technical Support for further assistance.
