CNET CNIG-914, Руководство пользователя

Страница: 41 / 59

40
Chapter 6 Troubleshooting
6.1 Troubleshooting
You should be able to use Broadband Router after going through the setup steps. If
you cannot access a website on your client PC, the possible reasons could be as
follows. Please check them in the following sequence.
1. Router ’s Hardware Failure.
2. Failed Connection between Broadband Router and Client PCs.
3. Failed Connection on the Broadband Router’s WAN Side.
4. DNS (Domain Name System) Failure.
Please refer to the solution for each reason and solve your problem. If the problem
persists, please contact our authorized distributor or dealer for technical support.
1. Router’s Hardware Failure
Solution:
1. Make sure the Power adapter is securely plugged into a power outlet and
Power LED is on.
2. Failed Connection between Broadband Router and Client PC
Solution:
1. Check if the LAN link/act LED is continuously ON or flashing.
2. Use the ping command to probe the network connection between
Broadband Router and the client PC. For example, the Broadband Router
LAN IP address is 192.168.1.1. Type “ Ping 192.168.1.1 . ” (Broadband
Router’s default IP address. If it shows “Reply from 192.168.1.1”, the
network connection works. If not, please use another Ethernet Cable to
connect your Client PC to Broadband Router.