How to Restore the Default Password and Configuration Settings
1. Use a sharp object such as a pen or a paper clip to press and hold the Reset button, located on
the rear panel of the router, for about 10 seconds, until the WPS/WIRELESS light goes off.
2. Release the Reset button, and wait for the router to restart, and for the WPS/WIRELESS light to
become solid green.
The factory default settings will be restored and the router’s IP address will be reset to
192.168.1.1
,
user name to
admin
, and password to
admin
.
Through Cable Modem - DHCP
Click on
One Button Setup
from the left navigation pane.
Connect one end of an Ethernet cable to the WAN port of
CBR-970, and another end to the Ethernet port of the modem.
Select
Ethernet Port
in
WAN interface
drop-down menu and
DHCP
in
WAN Access Type
drop-down menu. Click
Finish
button to finish setup process. The router will restart shortly.
Once the login page shows up, you are ready to surf the Inter-
net!
