This button is for doing
“
Tool Zero Set
”
-
HOME
This is the button for returning to Reference Point.
-
ZERO
This button plays a role that current coordinates of selected axis set by 0(Zero)
-
START
This is for starting to working program.
-
RESET
This is the same as emergency stop in mach3 and this can do emergency stop
or clear.
-
HOLD
This button is the same as
“
Feed Hold
”
while working.
2. Install Procedure.
1) Install Hardware.
This item is the type of USB connection.
If it is linked with USB Port, it is made to be aware of it right away.
If you want to know it, can check the below in device manager.
You can see that it is connected to Key Board & Human Interface Device.
2) Install Screen
Copy
“
Screen file
”
attached in Mach3 folder.
