i80 GNSS Receiver Quick Tour with FieldGenius (UHF Rover)
1
1.Prerequisites
Hardware
: CHC i80 Base with internal radio
Kit, Controller Kit,UHF Bar Antenna (450-470
MHz), Lithium Battery, pole
Software
: FieldGenius8
2.Steps to set i80 working as
rover in Internal UHF mode with
FieldGenius
2.1 Rover installation
Fix the bar antenna onto the antenna port,
screw the rover receiver on the pole, and
put the Controller adapter in the right place
like the figure.
2.2 Rover setting in FieldGenius
Power on the receiver
Long press the i80 power button until the
green and blue LED lights are on.
2. Click on
[start]
and then FieldGenius.
3. Click
[New Project]
to create a project or
Click
[Open]
to open one exist project.
