Quick Start Guide
T-Rex Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 23
Support: +49 (0)2831/91021-50
15.01.2015
6 .1 . 9
Load and save machine parameters
We have already programmed the software for you and saved the settings as machine parameters,
depending on the ordered accessories. A backup copy is on the USB stick.
e.g. (depending on order!):
1.
Operation Tangential knife
2.
Operation plasma cutting
3.
Operation milling with rotational axis
4.
Operation milling without rotational axis
To load these settings, follow these steps:
In "Parameters / Load machine setup" you can select
and upload the desired file.
Similarly, you can save changes to your settings!
Keep in mind that you overwrite existing settings if you
have not previously created a new file under a different
name!
TIP:
Do you want to make changes to the settings in WinPCNC? Then save the "current" settings under a
different name and then make your changes.
This ensures that you do not overwrite any existing settings (they are perhaps still needed !?)
