CLOCK SETUP
Press “+” on hour to add hour, press “-” to reduce hour;
Press “+” on minute to add minute, press “-” to reduce minute.
NOTE: The unit include two times system: Europe time (24 hour setup), America time
(12 hour setup), when show the AM mark it indicate morning time, when appear the PM
mark, it show the time of afternoon.
CALIBRATION
LCD ADJUST
Click on this button to confirm.
Click on this button to return
to setup interface
If the touching is not just, you
can use CALIBRATION to
adjust. Touch the middle of the
“+” cursor, adjust it as per the
order of the figure.
Click on UP/DOWN/LEFT/
RIGHT to adjust the position
of the screen, you can adjust 10
at most , click RESET to renew.
Click on this button to confirm
or return
Click on “OK”, store the setup.
Click on “X” to cancel the setup.
PAL I
PAL DK
PAL BG
16 TV FUNCTION OPERATION
Touch TV mode of the menu or press SOURCE button on remote control to switch to
TV mode, auto scan and store channels.
Press AMS/RPT button on remote control or SCAN touch button on display to auto
scan TV channels. The range of scan if full TV channel. The channels will auto store into
number button in sequence.
1.
Switch channel
1) Press SEEK + / SEEK- button on panel or SEEK + / SEEK- on remote control or /
touch button on display, unit will skip to previous or next stored channel.
2) Press number button on remote control, unit will skip to appointed channel, for
example, press 6 button, unit will skip to 6 channel. Press 10+, “_ _” will appear on left
top corner of display, press number button 3,9, unit will skip to 39 channel.
2.
Manual tuning TV channel
1)
Press and hold SEEK + button on panel, SEEK + button on remote control, or
touch button on display to scan TV channel in increase direction.
2)
Press and hold SEEK - button on panel, SEEK - button on remote control, or
touch button on display to scan TV channel in descending direction.
3.
TV sound system switch
Press the AUDI button on the touch screen to switch TV sound system. The sequence is
as follows:
4.
Blue screen
The display will be blue when there is no signal.
.
