CNB PM1063N, Руководство пользователя, Страница: 17 / 48

•
• SWING NO. [1~8]
- Selects Swing number to edit. If a selected Swing
has not defined, "NOT USED" is displayed in 1st
Position and 2nd Position.
• 1st POS, 2nd POS [PRESET 1~128]
- Set up the 2 position for Swing function.
If a selected preset is not defined, "UNDEFINED“
will be displayed as shown below.
◎
When swing function runs, camera moves from the preset assigned as the 1st point
to the preset assigned as the 2nd point. Then camera moves from the preset
assigned as the 2nd point to the preset assigned as the 1st point.
You can not set the same preset.
• SWING SPEED [1
°
/sec ~ 180
°
/sec]
- Sets Swing speed from 1 ° /sec to 180 ° /sec.
• CLEAR SWING [CANCEL/OK]
- Deletes current Swing data.
• PATTERN NO. [1~4]
- Selects Pattern number to edit.
If a selected pattern number is not defined,
"UNDEFINED" will be displayed under selected
pattern number.
• CLEAR PATTERN [CANCEL/OK]
- Deletes data in current pattern.
• EDIT PATTERN
- Starts editing pattern.
◎
By using Joystick, move to start position with appropriate zoom. To start pattern
recording, press NEAR key. To exit this menu, press FAR key.
◎
Move camera with joystick of controller or run preset function to memorize the path
(mostly curve path) in a selected pattern. The total memory size and the rest memory
size is displayed in the form of bar. Maximum 1200 communication commands can be
stored in a pattern.
◎
To save data and exit, press NEAR key. To cancel recording and delete record data,
press FAR key.
• GROUP NO. [1~8]
- Selects Group number to edit.
If a selected Group number is not defined,
"UNDEFINED" will be displayed under selected
Group number.
• CLEAR GROUP [CANCEL/OK]
- Deletes data in current Group.
• EDIT GROUP
- Starts editing Group.
SWING SETUP
PATTERN SETUP
EDIT PATTERN
GROUP SETUP
NEAR
SWING SETUP
SWING NO .
2ND POS .
BACK
EXIT
1
NOT USED
NOT USED
SWING SPEED
CLEAR SWING CANCEL
1ST POS .
30 /SEC
☞
PATTERN SETUP
PATTERN NO .
CLR PATTERN
BACK
EXIT
1
UNDEFINED
CANCEL
<EDIT PATTERN >
☞
EDIT PATTERN 1
MOVE TO START POSITION
[NEAR :START /FAR :CANCEL ]
EDIT PATTERN 1
[NEAR :SAVE /FAR :DELETE ]
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
0 /0 /x1/N
GROUP SETUP
GROUP NO .
CLEAR GROUP
BACK
EXIT
<EDIT GROUP >
☞
32 33
SWING SETUP
SWING NO .
2ND POS .
1
PRESET 5
NOT USED
1ST POS .
☞
UNDEFINED