CNB NXE3055VR Скачать руководство пользователя страница 45

Страница: 45 / 54

XNET User Manual

45 /

ITEM

DESCRIPTION

Event

Enable

Enable Event Enable / Disable event processing.

Event Mode

Sensor

Enable / Disable the Alarm Sensor.

Motion

Detection

Enable / Disable Motion Detection.

Network

Linkdown

Enable / Disable Network Linkdown.

Please use after

『

Save image to SD Memory

』

enabled.

Alarm output

port

This sends out Alarm signal to its output port during event

processing.

Event

Settings

Capture

Stream

Select saved stream when processing an event.
<Default : Main Stream>

When Dual-Codec enabled, you can select Dual Stream.
When Triple-Codec enabled, you can select Triple Stream.

Capture

Format

Display stream format of selected Capture Stream.

Capture

Frame

(MJPEG)

Configure saved frame among 1 / 2 / 3 when processing an

event.

Pre-Alarm

When processing an event, this establishes saving images or
video before the occurrence of the event.
It can be saved MAX 5 seconds before the event.

Post-Alarm

When processing an event, this establishes saving images or

video after the occurrence of the event.
It can be saved MAX 8 seconds before the event.

Event

Output

Upload image

to FTP

This allows Alarm images or video to be uploaded to an FTP

server when processing an event.
The client PC has to run FTP server to receive the images or

videos, and the information of the FTP server has to be
accurately entered and saved at the FTP Configuration page.

Send Image

to Email

This allows Alarm images (Not Video) and time information
message When processing an event.
Only on images file at the moment of the event gets the

image out via e-mail.
The e-mail address has to be accurately entered and saved

at SMTP configuration page.

Save image

to SD

Memory

This allows Alarm images to be saved to SD card when

processing an event.

This flag must be sure to check “disable” state when SD
Memory card remove.

Содержание NXE3055VR























































Результаты поиска

Содержание NXE3055VR

Отзывы:

CNB NXE3055VR, Руководство пользователя, Страница: 45 / 54

Результаты поиска

Содержание NXE3055VR

Отзывы: