UHF-300 Wireless Conference System
14
2.5 Wireless Conference System setting
2.5.1 Receiver unit UHF-300MC setting
a. POWER ON/POWER OFF
POWER ON: Hold the “POWER” button on the left front panel of receiver till LCD
display “ “ and then release it LCD will display “ “, after
system self-detecting LCD will display “ “
POWER OFF: Hold the “POWER” button on the left front panel of receiver till LCD
display “ “, receiver unit will powered off and all microphones in standby
status when released the button. If still hold the button, LCD will display
“ “, both receiver and microphones are powered off at the same time.
a.
System function key: There are 3 function keys on receiver unit
DOWN SET UP
b.
System mode setting:
System default mode:
CFREE-4MAX-FIFO
System support 10 modes setting by receiver unit (FIFO 1/2/3/4, LIMIT 1/2/3/4,
CONLY, CFREE), user can set these mode by
UP
&
DOWN
key. System will save and
keep the last setting mode in 3 seconds automatically or press
SET
key to save the
mode immediately.
C.ONLY
: When chairman microphone priority button was press on, the chairman
microphone is turn on while the delegate microphone being turn off until the priority
button is released, or delegate microphone can not turn on again.
Mode setting method: Press
SET
key one or several times till “
CFREE
” character
flashing, press
DOWN
, the flashing character will change to
CONLY
(press
UP
the
flashing character will change to
CFREE
), and then press
SET
to save it or wait about
3 seconds the system will save the mode automatically, characters will stop flashing.
C.FREE
: When chairman microphone priority button was press on, the chairman
microphone is turn on while the delegate microphone being turn off, but delegate
microphone can be turned on again even chairman microphone not released priority
button.
Mode setting method: please see
C.ONLY
setting method
1MAX-LIMIT:
System only allowed 1 piece delegate microphone turned on at the
same time, if other delegate microphones want turn on, user should turn off that
microphone first.
Number setting method: Press
SET
key one or several times till “4MAX” character
flashing, press
DOWN
or
UP
key till the flashing character change to
1MAX
, and then
press
SET
to save it or wait about 3 seconds the system will save the setting
automatically, characters will stop flashing
