7
Your First Backup
1
2
3
4
Once the software installation is complete and your system has rebooted, the BounceBack software will begin
to configure your first backup. During the setup process you will be prompted to determine the target location
where you will back your data up to.
At the Activation Window enter your Activation code from the flap of the CD envelop.
Click
Yes
to use a second internal hard drive or external drive as the backup device. Click
No
to direct the
backup to your primary hard drive.
If you choose
Yes
and you have both a second internal drive and external hard drive, the BounceBack software
will detect it and then prompt you to choose which hard drive to use. Select your choice
Use Internal Drive
or
Use External Drive
.
a.
Once you have selected the target location, the BounceBack software will scan your
computer to determine the size of the backup and estimate the total amount of time
to perform the backup. The backup size, time estimation, source and backup locations
are all displayed.
b.
If you choose to change the “default” backup created, you can select Settings in the
BounceBack Control Center enabling you to customize your backup. Otherwise, you may
choose between starting the backup now or later.
Macintosh Installa
tion
