STAND OFF ROTO MOLDED SWING UP
LADDER ASSEMBLY INSTRUCTIONS
Assemble the Ladder Gables (A) to the Ladder Treads (B) as shown
and as follows.
1. Ensure that the ladder treads, when mounted to the gables have
the vent holes (V) pointing towards the dock.
This ensures that the tread section will drain of any water
accumulation away from the dock surface when the treads are
raised from the down position.
2. Align one gable with one side of the tread section. Insert the Pivot
Bolt (C) through pivot hole in the tread section and through the
pivot hole of the gable.
3. Place a Flat Washer (D) over the protruding portion of the Pivot
Bolt (C) and thread a Lock Nut (E) over the threads. Do not tighten
completely.
Repeat steps 1 thru 4 for the opposite gable.
4. With both Gables affixed to the treads at the Pivot Bolts, tighten
the Pivot Bolts sufficiently to keep the Gables parallel to one
another. Do not over-tighten or pivoting the treads up or down
may be hindered.
5. Place the ladder in the desired position on the dock surface.
Ensure that the bases of the gables are each flush to the dock
face at the pivot extensions (F).
Ensure that the gables are Perpendicular to the dock face and
Parallel to one another.
6. Wood Docks: Mark and drill 3/16” pilot holes into the dock surface at each mounting hole
location (4) of each gable. Secure each gable to the dock surface with a 3/8” x 3-1/2” lag
bolt and flat washer.
For softwood, concrete, or other dock construction materials, use appropriate fasteners
such as thru-bolts or concrete inserts/ anchors.
7. Adjust the play between the gables and tread section by tightening the pivot bolts equally
on each side of the ladder.
CAUTION:
Failure to follow proper installation instructions may lead
to product failure and personal injury.
Regularly inspect for wear or damage. Replace as necessary.
DO NOT
EXCEED THE LADDERS’ MAXIMUM CAPACITY OF 500LB. (227KG)
v1.0
PART LISTING
ITEM DESCRIPTION QTY
A
Ladder Gables
2
B
Ladder Treads 1 x 4 step
C
Pivot Bolts
2
D
Flat Washer
2
E
Lock Nut
2
90º
90º
Gables Parallel
16”
TOP VIEW
Dock
Face
5”
10
3
/
4
”
20
1
/
4
”
16
1
/
4
”
29
1
/
4
”
20
1
⁄
2
”
46”
11”
Printed in Canada
A
D
F
B
V
A
300 New Huntington Rd, Woodbridge, ON, L4H 0R4
800-295-3625
www.dockedge.com
