CMP DEL MDV XL, Инструкции по установке и руководство по эксплуатации товара

Страница: 3 / 8

1
If local codes require a piping system pressure test including this vessel, BE
SURE TO COMPLY WITH THE FOLLOWING SAFETY INSTRUCTIONS:
• Check all clamps, bolts, lids, lock rings and system accessories to
ensure they are properly installed and secured before testing.
• RELEASE ALL AIR in the system before testing.
• Water pressure for test must NOT EXCEED 35 PSI.
• Water temperature for test must NOT EXCEED 100°F (38°C).
• Limit test to 24 hours. After test, visually check system to be sure it
is ready for operation.
General Information
The DEL MDV XL will effectively separate ozone bubbles from the
ozonated water produced by the DEL AOP and DEL Ozone. When the
flow enters the MDV XL, the ozone bubbles are allowed to float up and
accumulate at the top as the water exits out the bottom. The separated
ozone passes through a float valve and is sent through a carbon
destruct and neutralized to safely vent to the atmosphere.
The MDV XL should be used in all indoor, covered, and vinyl lined
pools where there is an AOP installed. It can also be used in outdoor
applications to eliminate bubbles in your return flow.
OVERVIEW
Figure 1a: System View
RETURN
TO POOL
FILTER
AOP
SANITIZER
HEATER
MDV XL
BALL VALVE
(OPTIONAL)
PUMP