Features:
High sensitivity,
1/4" H22
CMOS sensor
Use Hisilicon 3518E chip
Highest pixel is 1.0M, highest resolution is 720P(1280x720)
Optimized H.264 compression algorithm, support three code stream
（
720P, VGA, QVGA
）
,
support multiple mobile monitoring
（
iPhone, Windows Mobile, BlackBerry, Symbian, Android
）
Support multiple network agreement
：
TCP/IP
，
HTTP
，
TCP
，
ICMP
，
UDP
，
ARP
，
IGMP
，
SMTP
，
FTP
，
DHCP
，
DNS
，
DDNS
，
NTP
，
UPNP
，
RTSP
etc.
The adjustable audio.
Support ONVIF agreement
Support manufacturer and other DNS analysis
Support pictures of alarm send E-Mail
（
alarm can take three consecutive pictures
）
Support pictures of alarm and recordings uploaded to FTP servicer
Support pictures of timing captured to FTP servicer
Support static IP
,
as well as dynamic IP
（
DHCP
）
Support IE, Google, Firefox browser
Built-in Web Server convenient for users to use standard IE browser ensure the previous timing
scan and setting management
Support 12 users to view at the same time
（
support 4 users for each code stream
）
Provide motion detect
（
area/sensitivity available to set
）
alarm function
Support 10M/100M network adapt itself
Support UPNP auto port mapping
With ICR
Easy installation and angle adjustment
With POE
Cautions:
(a) In order to protect the camera, please avoid placing or using the camera under direct sunlight
(b) Please ensure that the input voltage range is within the specifications.
(c) Please do not place the camera in a location with a temperature exceeding 50ºC.
(d) Do not attempt to service the camera by yourself. Please refer all services to qualified Dealers.
Packing list:
Camera
1
Instruction Manual
1
Mounting Screw
2
Operation procedures:
1.
Attach the Mounting bracket to the wall or ceiling, wherever you want to install the camera.
Locate a wall stud or ceiling joint and secure the bracket by the supplied screws
2.
Connect the POE to RJ45.
3.
When picture shown up on the monitor, adjust the focus of the lens to obtain the best picture if
it is required.
4.
Adjust the supporter to make the camera to the suitable degree.
POE power supply
Note that the cable is an international standard with 48V POE.This wire can be powered by
POE. If there is no POE case, you can plug the network cable to the RJ45 port, in addition to
provide 12V power to the DC port. GND can be used as lightning protection grounding.
