You can access the screen for introduction of data by pressing the tab
“Config”,
as
shown in the image above.
Introduce the vessel information using the touch screen. You can jump to the next field
using the key
“Tab”
or the touch screen. The data introduced will be shown in the
deviation table certificate generated by the CMIcompass.
Pressing the tab
“Hardware”
you can access a screen to register the navigational
equipment connected to the CMI. You must select the port COM used with
“+/-“
in each
of the menus “
Input/ Output
”.
Pressing the tab
“About”
you will access the screen containing the information and the
contact data.
Once all the data have been introduced, press
“Ok”
to save them. In case of mistake,
you can press
“Cancel”
and go back to the starting screen without saving the changes.
