CMi C-B-RM-46, Оригинальное руководство пользователя

Страница: 42 / 180

GB
42
• Operating the machine at excess speed
can increase the risk of accident.
• When turning on the machine, make sure
that your fingers are not caught between
the moving cutting blades and fixed parts
of the machine.
Maintenance and storage
• Make sure that all nuts, bolts and screws
are firmly tightened. You will then know
that the product is in a safe working con-
dition.
• While petrol is in the tank, never store the
lawnmower in a building in which petrol
vapours may come into contact with
naked flames or sparks or can be easily
ignited.
•
To avoid the risk of fire keep the motor,
exhaust, and petrol tank area away from
grass, leaves, and leaking grease (oil).
• Regularly check the grass catcher for
wear or loss of functionality.
• Let the motor cool before turning off the
machine.
• When maintaining the cutting blades,
please note that the cutting blades can be
moved even when the machine is
switched off.
• For safety reasons always replace worn
or damaged parts. Use only original spare
parts and accessories.
•
Should the tank need draining, do so out-
doors using a petrol suction pump.
Your product at a glance
Note: The actual appearance of your
product may differ from the illustra-
tions.
►
P. 3, item 1
1. Switch-on lever
2. Handlebar
3. Handlebar, bottom part
4. Safety flap
5. Motor
6. Lever for cutting height adjustment
7. Collection box
8. Pull-starter
►
P. 3, item 2
9. Motor oil filling screw
10. Tank cover
11. Fuel pump
12. Air filter housing
13. Ignition cable with spark plug
Scope of supply
• Instructions for use
• Lawn mower
• Collection box
• Handlebar
• Handlebar, bottom part
• Bag containing small parts
Assembly
Mounting the handlebar
Note:
All mounting steps must be
performed on both sides.
►
P. 4, item 3
Note: Place the bottom part of the
handlebar on the machine as shown
in such a way that the pull starter
holder is on the right side.
– Position the bottom part of the handle
bar (3) into the locators on the product
and push through the carriage bolts (16).
– Position the toggle nuts (17) and tighten.
– Position the handle bar (2) onto the bot-
tom part (3) of the handle bar and push
through the carriage bolts (18).
– Position the toggle nuts (19) and tighten.
– Attach the pull starter (8) to the pull starter
holder (15) as illustrated.
Using for the first time
Filling with fuel
DANGER! Risk of injury! Petrol is
highly inflammable!
Before refuelling, switch off the motor
and let it cool down.
Closely observe all safety information
for handling fuel.
NOTICE! Risk of product damage!
The product is supplied without motor
oil.
Make sure it is filled with motor oil
before using for the first time.
Note: Use only appropriate fuel
(
►
Usable fuels and lubricants –
p. 46 ).
►
P. 4, item 4
– Open and remove the tank cover (10).
– Carefully top up the fuel (tank contents:
►
Technical data – p. 46 ). Do not spill!
– Re-tighten the tank cover (10) by hand.