5
PRECAUTIONS
IMPORTANT
Always follow the basic precautions listed below to avoid the possibility of serious injury or
even death from electrical shock, damages, fire or other hazards. These precautions
include, but are not limited to, the follows:
1
、
Read and understand all the instructions.
2
、
Always follow the instructions on the instrument.
3
、
Before cleaning the instrument, always remove the electric plug from the outlet as well
as the USB cable. When cleaning, use a soft and dry cloth. Do not use gasoline,
alcohol, acetone, turps or any other organic solutions; do not use liquid cleaner, spray
cleaner or too wet cloth.
4
、
Do not use the instrument near water or moisture, such as bathtub, washbasin,
washing poor in the kitchen or similar places.
5
、
Do not place the instrument in an unstable position where it might accidentally fall over.
6
、
Do not jam sinks or holes of the instrument; those sinks of holes are used for air
circulation to prevent the instrument from overheating. Do not place the instrument
near heat sink or any places with poor air circulation.
7
、
Do not place anything on the power cord. Make sure the power cord is set on a safe
place, so nobody will step on it and no body will trip over it.
8
、
Do not overload the outlet and the AC cable to avoid fire or electrical shock.
9
、
Do not insert anything in the instrument, which may cause fire or electrical shock. Do
not splash any kind of liquid to the instrument.
10
、
Do not disassemble the instrument in case of accidental electrical shock.
11
、
Always take the instrument to a qualified service center in need of repair. You will
cause yourself in danger if you open or remove the cover, and improper assembly may
cause electrical shock in the future use.
12
、
Unplug all the connectors and take the instrument to a qualified service center if
anything in the below listed happens:
（
1
）
The power cord or connector get hurt or worn out.
（
2
）
Any liquid get in the instrument.
（
3
）
The instrument gets rain or water splash.
（
4
）
The instrument dose not work properly after following all the instructions
regarding to the trouble shootings.
（
5
）
The instrument falls down or gets broken.
（
6
）
The instrument functions poorly.
Do not connect the instrument when thundering.
Do not set up the cord or outlet to a moist place, except for that the outlet is specially
designed for moist places.
When the power cord is connected to the AC outlet, do not touch the naked part of the
cord or the connector.
Always follow the instructions carefully when setting up the instrument.
Do not expose the instrument to rain or moisture, to avoid fire or electrical shock.