CME mayacart Скачать руководство пользователя страница 7

800.338.2372

7

www.cmecorp.com

• Enter administrator code
• Please follow the instructions herein to program the MayaCart with your own administrator codes in order to       

   replace the factory default codes prior to putting your MayaCart in service
• If code is correct, Green LED will appear for 1 second
• If code is incorrect, Orange LED will appear for a 1 second. User should stop and start over
• Within 10 seconds press ‘CLEAR’ and then ‘2’
• Green/Blue LED will alternately flash to indicate unit is ready to receive code to change

Enter code to change:

• If code is accepted, Orange/Green LED will flash
• If code is not accepted, Orange LED will turn on for 2 seconds, and then Green/Blue LED will flash alternatively.          

   User should re-enter code while blue/green LED is flashing
• While Orange/Green LED is flashing, enter new code
• If code is accepted, Green/Blue LED will flash alternatively
• If code is not accepted, Orange LED will flash for 1 second. User should start over again.
• Press ‘LOCK’ to save. Green LED will flash for 2 seconds

To Change A User Code

Enter Additional User Code

• Enter in administrator code 
• Within 10 seconds, press ‘CLEAR’ and then ‘1’
• Green/Orange LED will alternately flash to indicate unit is ready to receive new unlock code 
• Enter in new code (4 digits)
• If new code/card is accepted, Green/Blue LED will alternately flash 
• If new code/card is not accepted, Orange LED will turn on. User should stop and start over
• Press ‘LOCK’ to save, green LED will flash for 2 seconds
• Ensure the code was added by entering code and seeing if this opens the cart at the correct access level  

      

   programmed.  If the cart is already open, Green LED will appear to signal the unit recognizes the code. If the code    

   was not added, Orange LED will appear when code is entered, and the cart will not open

• Enter administrator code 
• If code is correct, Green LED will appear for 1 second
• If code is incorrect, Orange LED will appear for 1 second. User should stop and start over
• Within 10 seconds press ‘CLEAR’ and then ‘9’
• Green/Orange LED will alternately flash to indicate unit is ready to receive unlock code to delete
• Enter code or place proximity card on top of keypad

Press ‘LOCK’ to save:

• If code/card is not accepted (no such code/card to delete or code was entered incorrectly) then Orange LED will     

   flash for 2 seconds. User should stop and start over
• If code/card is entered correctly, then Green LED flashes for 2 seconds. Code has been deleted
• Ensure that the code was deleted by entering the deleted code: Orange LED will appear, and cart should not open

To Delete A User Code

Содержание mayacart









Отзывы: