9
+
5 SEC.
+
+
+
1
1
3
0
6
C U R R E N T C O D E D I S P L AY
To find out the code of your remote control, follow this procedure:
1
. Hold down the
MUTE
and
ON/OFF
keys together for 5
seconds until the light indicator starts to flash.
2
. When the
MUTE
and
ON/OFF
keys are released, press
and release the
1-/--
key within 8 seconds.
3
. After a pause of several seconds, the indicator light
produces four series of flashes with a space between
them, corresponding to the code you are looking for. Count
the number of flashes; each series of flashes corresponds
to one figure in the code.
10 flashes correspond to 0
.
4
. Note the code on the adhesive label inside the battery
cover in case you have to reprogramme the remote
control subsequently.
NB: this operation cannot be interrupted and the remote control cannot therefore be used
until the end of the four series of flashes.
If you know the exact code with which to programme the remote control, enter it as follows:
ENTERING THE CODE
1
. Hold down the
MUTE
and
ON/OFF
keys together for 5
seconds until the light indicator starts to flash.
2
. Release the keys and enter the code (eg:
TV 1306).
Three
flashes
indicate that the operation has been completed
correctly.
HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD
Find them on your remote control by pressing the keys one by one and discovering the commands that interest
you.
In particular, the additional functions most frequently used, such as
NORMALIZATION
,
COLOUR
and
BRIGHTNESS
,
can be found on the following keys:
Although not indicated on the keypad,
some keys can be used for additional commands.
For the functions used less frequently, look for the additional commands on the site
www.cme.it
.
As well as easily finding the code to programme your remote control, consulting the
on-line guide
will help you to find which keys on the remote control correspond to the additional commands.
Normalization:
Brightness (+):
or
green
Brightness (-):
or
red
Colour (+):
or
blue
Colour (-):
or
yellow
+
5 SEC.
......................................................... =
1
.............................................. =
3
=
0
............................ =
6
Code obtained =
1 3 0 6
