Safety notice
To ensure the product remains
stable when in use, do not extend
the monitor past the front edge of
the base plate (fig. 13 &14).
Vision H + Laptop with Integrated Power - Information and Instruction Sheet
CMD Ltd, Sycamore Road, Eastwood Trading Estate, Rotherham, S65 1EN. United Kingdom.
T
: +44 (0) 1709 829 511 |
F
: +44 (0) 1709 378 380 |
E
W
: www.cmd-ltd.com
Part Number 134199. Issue 2 Date: 29/09/2020
Cleaning, Storage and Maintenance
Service Components:
Available to order.
Cleaning &
Maintenance:
Dry cloth, no abrasives or solvents to
be used on the product surface.
Handling & Storage:
Do not drop.
Warning
Do not exceed the recommended maximum weight of 5kgs.
Do not extend the monitor past the front edge of the base
plate.
Assembly Instructions
1.
Position the base in a suitable position making
sure the M8 fixing screw is at the back of the
desk or table (fig. 03). Note: the integrated power
module is pre-installed on the base.
2.
Position the pole over the M8 fixing screw and
secure by turning the pole clockwise until hand
tight (fig. 04).
3.
Assemble the laptop tray and secure it to the
laptop tray arm (fig. 05, 06 & 07).
4.
Fit the laptop tray arm and the single monitor arm
to the pole (fig. 08) and secure in place using the
fixing lever (fig. 09).
5.
Install the cable management clips to the pole and
arm sections (fig. 09 & 10).
6.
Connect the monitor to the quick release VESA
using the screws provided and attach the VESA to
the single monitor arm (fig. 10 & 11).
7.
The VESA head may tighten or loosen after
prolonged use so may need adjusting (fig. 12).
Weight Adjustment
+ Kg
- Kg
fig. 12
fig. 03
fig. 04
fig. 05
fig. 06
fig. 07
fig. 08
fig. 09
fig. 10
fig. 11
fig. 13
fig. 14
Product Assembly
