Chip - Information and Instruction Guide
Part No:
133800
C clamp Fixing Instructions
1. The Chip module is supplied with
the C clamp installed (fig. 01).
2. Place the unit in the desired
position on the desk surface and
ensure the C clamp is tight up
against the edge of the surface
(fig. 02).
3. Tighten the C clamp bolt with
a 5mm Allen key (not supplied).
Do not use power tools (fig. 03).
4. The C clamp has been designed
to fit desk thicknesses between
15mm and 35mm.
5. Once the module is connected to
the power supply your device can
be charged using any standard
USB cable (fig. 04).
fig. 01
fig. 02
fig. 03
fig. 04
