BULLETIN NO. ELEC-IM140/1
1
A
Replaces
ELEC-IM140-141/09A
Instrument
Mid-West
®
CE Marking Statements:
The Electrical Configurations A,B, E, & F of this product are CE marked in compliance with the Low Voltage Directive to EN-61010-1.
These products shall not be placed in an Explosive atmosphere as defined by the ATEX Directive 94/9/EC except if evaluated to be “Simple
Apparatus”.
They may be classified as simple apparatus. However, the evaluation to the relevant portions of the applicable standards and clearly
identifying the product as simple apparatus shall be the responsibility of the end user.
The Pressure Equipment Directive has been determined to be
non applicable for CE marking
. These products are manufactured in accordance
with article 3, paragraph 3 of the directive, “sound engineering practice”. They fall below category I for non-hazardous gases, hazardous liquids,
& non-hazardous liquids. This product also falls below category I for hazardous gases at or below 200 bar.
Simple Apparatus NEC 504.2
The A, B, E, & F Electrical configurations of this product meet the simple apparatus definition as defined in NEC 504.2 of Article 504
(Intrinsically Safe Systems). Because of this classification, equipment listing is not required (504.4) and ordinary wiring methods shall be
permitted (504.20). Proper installation of this product in a hazardous location to the applicable requirements is the responsibility of the end user /
equipment installer.
EMC Directive:
The transmitter design has been evaluated to and passed the following “EN” Standards as they relate to the EMC directive. However, the
units are not CE marked for compliance to the EMC directive.
IEC EN61326:1997 Environment Industrial, Electrical Equipment for measurement, Control and Laboratory use,
EMCrequirements from which:
EN55011:1998Emission standard for Industrial, Scientific and Medical Equipment, Class A
EN61000-4-2:1995 Electrostatic discharge (ESD) immunity
EN61000-4-3:1996 Radiated EM field immunity
ENV50204:1995 Radiated EM field immunity from digital telephones (GSM)
EN61000-4-4:199 5Electrical fast transient (EFT) immunity
EN61000-4-5:1995 Surge immunity
EN61000-4-6:1996RF conducted immunity
EN61000-4-8:1993 Power Frequency magnetic field
Warning:
The suitability of the application and installation of this differential pressure switch / transmitter is the
responsibility of the end user. The applicable certifications, listings apply to the differential
pressure switch / transmitter only.
Mid-West
Instrument
6500 Dobry Dr. Sterling Heights, MI 48314
(586)254-6500 FAX (586)254-6509
E-Mail:
Web Page:
www.midwestinstrument.com
PROOF PRESSURE:
2X Working Pressure
Warranty
: 5 Years Transmitter (1 Year)
WORKING PRESSURE:
3,000 PSI (AL, SS) 1500 PSI (Brass)
TEMPERATURE LIMITS:
-40
F to + 200
F
(Switch Options); -20
F TO + 150
F (Transmitter Option)
These limits are based on the entire instrument being saturated to these temperatures. System (process) temperatures may exceed
these limitations with proper installation. Contact our customer service representative for details.
CMC TECHNOLOGIES
P
TY
L
IMITED
ACN: 47 085 991 224 ABN: 47 085 991 224
Phone:
+61 2 9669 4000
Unit 19, 77 Bourke Rd
Engineering &
Fax:
+61
2
9669
4111
Alexandria
Industrial
Email:
NSW 2015
Instrumentation
Website:
www.cmctechnologies.com.au
AUSTRALIA