CMC Airmaster R1, Руководство по установке оборудования

Страница: 4 / 41

C.M.C. n.v. - Airmaster R1 installation guide – base unit – V1.1 – MANY0317A.00
Page 4 of 41
1. Introduction
The Airmaster R1 is an industrial controller consisting of two parts: a base unit and an HMI
(Human Machine Interface). The base unit is the real control unit and the HMI is the unit for
interaction with the user.
This hardware installation guide is a guide for the hardware related items. Please read the
software specficiations file for information on how to work with the unit.
The application area is restricted to machines that comply with the European machine
directive 89/37/EEC and the EMC directive 89/336/EEC. The application area is located in
electrical driven compressors and dryers in an industrial environment. Please contact CMC
for appliance in other machines.
The Airmaster R1 does not need to comply to the European Pressure Equipment Directive
97/23/EC, because no parts are under pressure, and the Airmaster R1 is not a safety
component.
The Airmaster R1 is a component, which can’t operate without other components. However,
it is not a safety component, and it is not a machine.
The controller is to be used in a standard industrial environment. The controller may only be
used in places without an explosion risk. So it may never be used where explosion-proof
equipment is required. This controller may not be used for maritime purposes. It may also
not be used in any way as part of an assembly that could be used for military or terrorist use.
The Airmaster R1 base unit without additional protection is to be used in areas of pollution
degree 1 or 2. Of course the user can add additional protection for higher pollution degrees.
The installation of the controller must be made in accordance with the applicable national
and international standards and regulations.
For the American market UL508 is applicable, in accordance with the NFPA.
HMI
Base unit