ZL-GR6150-001-V1
Installation and Connection Instruction Manual
CMA (WUHU) Robotics Company Limited
31
Tighten the two M6 bolts with No. 5 Allen
key. Do not use a torque greater than 5 Nm.
Re-connect all disconnected cables as soon
as possible.
Replace drive step 7
Open the hinge cover and set the address of
the drive as shown in the table below.
Replace drive step 8
4.4.3 Replace the radiator fan
Turn off the power supply of the electric
cabinet and open the cabinet door
The cooling fan of the radiator are all inside
(on the first line)
Press in the two clips indicated by the arrow
Replace radiator fan step 1
