ZL-GR6150-001-V1
Installation and Connection Instruction Manual
CMA (WUHU) Robotics Company Limited
26
Detailed wiring and layout in cabinet 6
4.3 Daily maintenance
The work related to the replacement of parts described can be carried out according to the instructions
of the after-sales service department, and generally qualified personnel can carry out the work, which does
not necessarily need the personnel of CMA(Wuhu) Robotics Technology Co., Ltd.
Attention
All maintenance work must be carried out after the robot stops and the power is cut
off.
This work must be carried out by properly trained personnel and precautions must
be taken to avoid accidental restart and electric shock.
In case of failure, please contact CMA Wuhu Robot Technology Co., Ltd. at any time
to provide relevant suggestions on how to solve this problem, or contact your engineer for
maintenance.
According to the relevant standard (IEC en 60204-1), when the robot parts and
related electrical equipment are replaced or changed, the relevant test work must be
carried out again.
Without prior written permission, and due to repair or other work caused by
property damage or personal injury, CMA Wuhu Robot Technology Co., Ltd. denies all
related compensation.
