CM 646 Series Скачать руководство пользователя страница 6

Страница: 6 / 30

FOREWORD

This manual contains important information to help you properly install, operate and maintain your Cyclone Hoist for maximum
performance, economy and safety.

Please study its contents thoroughly before putting your hoist into operation. By practicing correct operating procedures and by
carrying out the recommended preventive maintenance suggestions, you will experience long, dependable and safe service.

After you have completely familiarized yourself with the contents of this manual, we recommend that you carefully file it for future
reference.

The information herein is directed to the proper use, care and maintenance of the Cyclone Hoist and does not comprise a hand-
book on the broad subject of rigging. Rigging can be defined as the process of lifting and moving heavy loads using hoists and
other information, we recommended consulting a standard textbook on the subject.

A copy of this manual is packed with each Cyclone Hand and Low Headroom Trolley Hoist.

SAFETY PRECAUTIONS

Master Parts Depots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i
Do’s and Do Not’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii
Hoist Safety is Up To You . . . . . . . . . . . . . . . . . . . . . . . . .iii
Foreward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

GENERAL INFORMATION

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
CM Repair/Replacement Policy . . . . . . . . . . . . . . . . . . . .3

OPERATION AND INSTALLATION

Unpacking Information . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Trolley Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

OPERATING AND SAFETY PROCEDURES

. . . . . . . . . . . .5

INSPECTION

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Frequent Inspections . . . . . . . . . . . . . . . . . . . . . . . . .6
Periodic Inspections . . . . . . . . . . . . . . . . . . . . . . . . . .6
Hook Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Load Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Hand Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MAINTENANCE

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Recommended Spare Parts . . . . . . . . . . . . . . . . . . . .8
Exterior Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Reeving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-14
Cutting Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

PARTS LIST

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . .16
Cyclone Hand Hoist Parts List . . . . . . . . . . . . . .17-22
Cyclone Low Headroom
Trolley Hoist Parts List . . . . . . . . . . . . . . . . . . . . .23-27

LIST OF TABLES

Frequent Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Periodic Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Min. Hoist Loads & Pulls . . . . . . . . . . . . . . . . . . . . . . . . .10

LIST OF ILLUSTRATIONS

Cyclone Available Models . . . . . . . . . . . . . . . . . . . . . . . .2

Cyclone Low Headroom Trolley Hoist . . . . . . . . . . . . . . .3

Hook Styles Available . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Raising and Lowering Hook . . . . . . . . . . . . . . . . . . . . . . .3

Trolley Spacer Arrangement . . . . . . . . . . . . . . . . . . . . . . .4

Cyclone Hand Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Latch Hook Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Latchlok Hook Opening . . . . . . . . . . . . . . . . . . . . . . . . . .7

Gaging Load Chain Wear . . . . . . . . . . . . . . . . . . . . . . . . .7

Brake Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Load Limiter Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Load Limiter Calibration . . . . . . . . . . . . . . . . . . . . . . . . .10

Bearing Retainer Screws . . . . . . . . . . . . . . . . . . . . . . . .10

Hoist Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Hook Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Reeving ¼-½-1 Ton Hoists . . . . . . . . . . . . . . . . . . . . . . .11

Reeving 1½-10 Ton Hoists . . . . . . . . . . . . . . . . . . . . . . .12

Reeving 3-4 Ton Hoists . . . . . . . . . . . . . . . . . . . . . . . . . .12

Reeving 5-6 Ton Hoists . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Reeving 8 Ton Hoists . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Reeving 10 Ton Hoists . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Cutting Chain by Nicking . . . . . . . . . . . . . . . . . . . . . . . . . .14

Cutting Chain with Bolt Cutter . . . . . . . . . . . . . . . . . . . . . .14

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Cyclone Hand Hoist Exploded View . . . . . . . . . . . . . .21-22

Cyclone Low Headroom Trolley
Hoist Parts List Drawing . . . . . . . . . . . . . . . . . . . . . . . .23-25

TABLE OF CONTENTS

PAGE

For more information contact: Sievert Crane and Hoist, (708) 771-1600, [email protected], www.sievertcrane.com

Содержание 646 Series































Результаты поиска

Содержание 646 Series

Отзывы:

Похожие инструкции для 646 Series

Бренды по названию

Популярные бренды

CM 646 Series, Руководство по эксплуатации, техническому обслуживанию и каталог запасных частей

Результаты поиска

Содержание 646 Series

Отзывы:

Похожие инструкции для 646 Series

Бренды по названию

Популярные бренды