Connecting
the
yepp to
a
PC
Before connecting yepp to PC, make sure to install
USB driver. If “Add New Hardware Wizard”appears,
press the [Cancel] button and install
the
USB driver.
System
Requirements.
The PC system must meet the
following specifications:
Pentium 133MHz or greater.
Windows 98 SE/ME/2000/XP.
40MB of available hard disk space
CD-ROM drive.
(double speed or greater)
USB port (1.1) supported.
DirectX 8.0 or above.
Continued...
N
N
o
o
t
t
e
e
Windows ME, 2000 and XP can
recognize the driver without installing
the provided program. However,
you must install the program in order to
format the yepp and upgrade the
firmware.
Windows ME, 2000 and XP can recognize
the driver without installing the provided
program. However, you must install the
program in order to format yepp and
upgrade firmware.
If the
CA-F100
program has not been
installed in Windows 98, then it will not
communicate with your removable disk.
You must install the USB driver file first.
Installing software
1
Insert the Installation CD into
the
CD-ROM drive.
The picture shown below appears.
Select
[yepp USB Driver]
2
Click
[Next]
in the series of windows that appear.
