CM security FPC1381, Руководство пользователя

Страница: 8 / 23

FingerPrintScan System FPC 1381
– Technical Handbook
page 8 Version 2.00
10. Scanner Displays
The FP1384 and FP1385 scanners have optical and acoustic displays. Their
meanings are summarised in the following table:
Scanner FPL1384 Scanner FPL1385 Both FPL Meaning
LED
green LED
yellow LED
red LED
left LED
right Buzzer
Briefly
lighting up
every 5
seconds - - Briefly
flashing
blue
every 5
sec Briefly
flashing
blue
every 5
sec - Status display:
everything OK!
- Briefly
lighting
up
every 5
seconds - Briefly
flashing
blue
every 5
sec Briefly
flashing
blue
every 5
sec - Status display: scanner
in standby mode,
everything OK!
Briefly
lighting up
every 5
seconds - Briefly
lighting
up every
5
seconds Briefly
flashing
blue
every 5
sec Briefly
flashing
red every
5 sec - No communication with
EU! check data lines
2 sec - - 2 sec
green - 1 sec Positive
acknowledgement: e.g.
finger is successfully
incorporated
2 sec - 2 sec
blinking 2 sec
green Blinking
red 2 sec 1.5 sec
intermitte
nt Finger recognised but
action cannot be
performed!
- - 2 sec
blinking - Blinking
red 2 sec 1.5 sec
intermitte
nt Negative
acknowledgement :
finger is not recognised
or drawn incorrectly over
sensor
2 sec blinking - 2 sec
green Blinking
yellow 1 sec Acknowledged for
arm/disarm, but EU
waits for arm/disarm
signal from hazard
detection system
- shining - Shining
yellow Shining
yellow 1 sec. 2 finger or 4 eye
principle active. Wait for
second finger or EU
waits for arm/disarm
acknowledgement from
the hazard detection
system after an
arm/disarm request
Flash yellow 3x with approx. 1 sec pause - Incorporate finger. Draw
over 3 more times
Flash yellow 2x with approx. 1 sec pause - Incorporate finger. Draw
over 2 more times
Flash yellow 1x with approx. 1 sec pause - Incorporate finger. Draw
over 1 more time