manualshive.com logo in svg

CM Industries Kool Run KR502HW, Руководство по эксплуатации и список запасных частей, Страница: 3 / 16

Поделиться
Скачать
CM Industries Kool Run KR502HW Скачать руководство пользователя страница 3

2

Nozzle

-Push slip-on nozzle until it bottoms on the insulator.
-Pull slip-on nozzle off to remove it.

®

TM

CMI   Taper Lock   Contact Tip

-Thread tip into retaining head and tighten.
-Unscrew to remove (use pliers if tight).

Gas Diffuser

-Screw onto the end of neck.

  (Use 5/8” wrench to tighten)

-Unscrew to remove.

Neck Insulator

-Slip onto the front of the neck.
-Unscrew retaining head and pull off to remove.

Neck

-Push neck into torch body.

 (Make sure the pins line up with the slot inside the Torch Body)

-To remove, loosen the neck clamp under the collar.
-Pull neck out.

Neck Clamp

-Turn collar on torch body to expose screw.
-Once neck is inserted, tighten screw
 using a 4mm Hex wrench to secure 
 neck in place.
-Turn collar to to hide screw hole

Hollow Wrist Body

Spacer

M5 Screws

M4 Screws

Insulating Disc

-Line up pin to pinhole
 on robot

 (Use M4 screws to hold to robot) 

Torch Body Cover

Spacer
Sleeve

Complete Assembly Overview

 

for Solid Mount System

-Installation & Removal of Consumables-

Содержание Kool Run KR502HW

















Отзывы:

Нет отзывов