Club Car TransPorter 4, Руководство по техническому обслуживанию и ремонту

Страница: 72 / 286

6
Brake Adjustment BRAKE SYSTEM
BRAKE CLUSTER ADJUSTMENT
1. Chock the wheels.
2. To provide slack in the brake cables, loosen the equalizer retaining nuts (1 and 5) on the equalizer rod (2)
(Figure 6-13, Page 6-8) .
3. Loosen the front brake equalizer rod (Figure 6-14, Page 6-8) .
2801
Figure 6-13 Rear Equalizer Adjustment
2802
Figure 6-14 Front Equalizer Adjustment
4. Remove the dust cover (4) on the left and right rear brake cluster assemblies (Figure 6-15, Page 6-8) .
4
5
4
5
2804
Figure 6-15 Rear Brake Adjustment Bolt
2803
Figure 6-16 Front Brake Adjustment Bolt
5. Use a torque wrench and a 7 mm 8–point socket or Club Car brake adjustment tool to turn the brake adjustment
bolt (5) on each brake clockwise until it is tightened to 15 ft·lb (20.3 N·m) then back off 5 clicks.
See following
NOTE
NOTE: If a wheel can still be turned by hand after step 4, inspect the brake clusters and clean and/or replace all
parts that do not work properly.
6. Repeat procedure at front brake clusters.
Page 6-8 2019 Transporter Maintenance and Service Manual