Club Car Precedent 2014, Руководство по техническому обслуживанию и ремонту

Страница: 393 / 548

UNITIZED TRANSAXLE (GASOLINE VEHICLE) Forward/Reverse Shifter Cable
24
FORWARD/REVERSE SHIFTER CABLE ADJUSTMENT
With the shifter lever of the unitized transaxle in the NEUTRAL position (Figure 24-58, Page 24-24) , the
Forward/Reverse handle (20) should be straight up. For minor adjustments, the lock nut (26) may be loosened and the
ball joint socket (27) rotated to get the proper adjustment.
See following CAUTION.
CAUTION
• Be sure threads of cable are engaged in ball joint socket at least 1/4 inch (6.35 mm). If ball joint socket
comes loose from the cable, the Forward/Reverse shifter will not operate properly.
For major adjustments, the cable retaining nuts (28) must be loosened and adjusted. When the cable is properly
adjusted, with the Forward/Reverse handle (20)
(Figure 24-58, Page 24-24) in the NEUTRAL position, the shift
lever of the transaxle will also be in the NEUTRAL position (Figure 24-59, Page 24-25) . Retighten nuts at the
Forward/Reverse assembly to 43 in·lb (4.9 N·m).
F
N
R
552
Figure 24-59 Forward/Reverse Shifter Positions
2014 Precedent ® Golf Car Maintenance and Service Manual Page 24-25