Club Car Precedent 2014, Руководство по техническому обслуживанию и ремонту

Страница: 377 / 548

UNITIZED TRANSAXLE (GASOLINE VEHICLE) Axle Bearing and Shaft – Graziano
24
6.2. Use a press to separate the axle oil seal (15) from the adapter ring (39) (Figure 24-13, Page 24-9) . Retain
the adapter ring and discard the oil seal.
7. Inspect the axle shaft assembly to be sure the bearing and collar have not slipped and are still seated against
the shoulder on the axle shaft.
8. Inspect bearing. If the bearing in a Graziano transaxle is worn or damaged, the entire axle shaft assembly
must be replaced.
0
0
1
2
762
Figure 24-11 Remove Internal Retaining Ring
763
Figure 24-12 Axle Seal and Adapter Ring Removal
15
39
A
A. Adapter Ring Lip
764
Figure 24-13 Axle Seal and Adapter Ring
765
Figure 24-14 Axle Seal and Adapter Ring Installation
AXLE BEARING
Do not remove the axle bearing from a Graziano axleshaft. If bearing is worn or damaged, the entire axleshaft
assembly must be replaced.
AXLE SHAFT AND OIL SEAL INSTALLATION
1. If previously removed, install a new oil seal.
1.1. Clean seal seat in the adapter ring (39) (Figure 24-13, Page 24-9) .
2014 Precedent ® Golf Car Maintenance and Service Manual Page 24-9