Club Car Pioneer 900, Руководство по техническому обслуживанию

Страница: 59 / 344

WHEEL BRAKE ASSEMBLIES Front Brake Cables
2001 Pioneer 900 Gasoline Vehicle Maintenance and Service Manual Page 6-13
6
6. Place brake cables into front spindle brackets and install E-clips (1) (Figure 6-18, Page 6-11).
7. Connect the cables to the brake actuator arms using new clevis pins (3) and cotter pins (2).
8. Secure the two brake cable clamps (5) together with a bolt (4) and nut (6). Secure the clamps three
inches above the shock tower.
9. Install, but do not tighten the large white wire tie (1) under the steering support (9), over the shock
tower (8), and around the brake cables (10) as shown (Figure 6-20, Page 6-13). See also, Figure 6-
18, Page 6-11.
Figure 6-20 Secure Front Brake Cables
Figure 6-21 Align Cables With Tower
1
8
9
10
8
1
Use back of shock tower
as a reference point